Solvent Base Lamination Machine Manufacturer

Solvent Base Lamination Machine

Web Width
500 – 1500 mm
Unwind Rewind Diameter
800 mm
Machine Speed
150,200,250 M/Min
Hot Air Temp
50 – 150 / 250°C
Tunnel Length
21,28,35 ft.
Heat Source
Hot Air Generator / Thermic Fluid System (Customer Scope)
Synchronized Drive
5 HP / 5 / 7.5,10 / 3 HP for Coater
3/5 HP
Material to be Laminated
Polyester, Paper, BOPP, Aluminum Foil, LDPE
Pneumatically Operated
Pneumatically Operated

Perfect Lamination Machine

This Solvent Base Lamination Machine runs up to 400 meters/minutes and it is suitable for PET/MET PET, BOPP/MET BOPP, LDPE, LLDPE and Laminates. Our machine is designed and developed according to industry standards for various solvent-base application like plastic films.

Fadia Engineer’s solvent-base machine are made with high quality materials and have high productivity. These machines are easy to operate and has moderate energy consumption. This solvent-base machine is capable to handle various laminating jobs.

With the using of latest technology and well designed for easy interface, this machine is meant for maximum productivity and performance.

Fadia Engineer created this machine to fulfil the need of solvent-base lamination for flexible packaging industry. Many customers choose this machine as it has maximum performance and has easy operating system for various laminating jobs. This solvent-base machine is designed specially for short and medium runs for various solvent-base applications.

The Fadia engineer solvent-base lamination machine is made with high quality material and have strong and sturdy steel frame structure. There are stiffening tie-rods to minimize the vibration when it is on maximum speed. Every used part in the machine mechanical and electrical are passed from various quality and performance tests to ensure the long life of the machine.

The shaft-less unwind & rewind web tension is controlled by latest generation Servo Motor and Servo Drive. This system maintains the set tension very precise for entire reel run. Machine is equipped with AC Servo Drive and Servo Motor with pneumatically loaded low friction dancing roller assembly and load cell for tension feed-back and actual tension display.

This unwind & rewind arms are move on high precision linear bushings and it is supported by chromeplated steel bars.

There is Servo based closed loop controller for web handling having latest electronics. This machine has its own intelligent software and motion controller which control and supervise the entire machine operations.

There is touch screen display for operating interface very quick and easy. For the safety of machine, the electronics are going through software routine time to time.

In the laminator unit there is heated chrome plated ground steel roll. It is coated with hard rubber & chrome plated steel back-up roller and it is driven by pneumatic pistons and it can be adjusted at both ends. There is a steel back-up roller and it press against the rubber roller for a parallelism for avoiding rubber roller flexion.

It is driven by an independent motor which is synchronized with coating unit motor. As the tension on web carrying the adhesive to point of lamination and it can be controlled with great precision.